Search

Start Over Thesis Supervisor Mary I Frecker

1. PERFORMANCE OF INDUSTRIAL FLUIDLASTIC™ MOUNTS AND FEASIBILITY FOR HELICOPTER SEAT APPLICATION

open_access
Open Access
Author:
Santo, Angela N
Title:
PERFORMANCE OF INDUSTRIAL FLUIDLASTIC™ MOUNTS AND FEASIBILITY FOR HELICOPTER SEAT APPLICATION
Area of Honors:
Mechanical Engineering
Keywords:
helicopter
fluidlastic
helicopter seat
whole body vibration
pilot injury
File:
Download HonorsThesis_Final_ASanto.pdf
Thesis Supervisors:
Christopher Rahn, Thesis Supervisor
Christopher D. Rahn, Thesis Supervisor
Mary I Frecker, Thesis Honors Advisor

2. A FUNDAMENTAL STUDY OF SAND INVESTMENT SYSTEMS USING COMPUTATIONAL PARTICLE FLUID DYNAMICS

open_access
Open Access
Author:
Orlowski, Joshua David
Title:
A FUNDAMENTAL STUDY OF SAND INVESTMENT SYSTEMS USING COMPUTATIONAL PARTICLE FLUID DYNAMICS
Area of Honors:
Mechanical Engineering
Keywords:
cores
core blowing
cpfd
computational particle fluid dynamics
File:
Download Josh_Orlowski_Thesis_no_sig_page.pdf
Thesis Supervisors:
Robert Carl Voigt, Thesis Supervisor
Robert Carl Voigt, Thesis Supervisor
Mary I Frecker, Thesis Honors Advisor

3. Design and Testing of an Experimental Model to Measure Interfacial Permeability in a Polymer Electrolyte Fuel Cell

open_access
Open Access
Author:
Comerford, John Jeffrey
Title:
Design and Testing of an Experimental Model to Measure Interfacial Permeability in a Polymer Electrolyte Fuel Cell
Area of Honors:
Mechanical Engineering
Keywords:
polymer electrolyte fuel cell
interfacial permeability
File:
Download FinalDraft_4-19.pdf
Thesis Supervisors:
Professor Matthew M Mench, Thesis Supervisor
Professor Matthew M Mench, Thesis Supervisor
Mary I Frecker, Faculty Reader
Professor Matthew M Mench, Thesis Honors Advisor

7. DESIGN OF A HANDLE TO CONTROL A MULTIFUNCTIONAL FORCEPS FOR USE IN ENDOSCOPIC SURGERY

open_access
Open Access
Author:
Mansley, Ryan Edward
Title:
DESIGN OF A HANDLE TO CONTROL A MULTIFUNCTIONAL FORCEPS FOR USE IN ENDOSCOPIC SURGERY
Area of Honors:
Mechanical Engineering
Keywords:
Endoscope
Multifunctional
Forceps
Handle design
Natural Orifice Transluminal Endoscopic Surgery
NOTES
Minimally Invasive Surgery
MIS
Endoscopic Surgery
File:
Download Ryan_Mansleys_Thesis.pdf
Thesis Supervisors:
Mary I Frecker, Thesis Supervisor
Mary I Frecker, Thesis Supervisor
James Gordon Brasseur, Thesis Honors Advisor

9. Development and characterization of active terpolymer for origami-inspired actuation

open_access
Open Access
Author:
Arrojado, Erika
Title:
Development and characterization of active terpolymer for origami-inspired actuation
Area of Honors:
Mechanical Engineering
Keywords:
origami engineering
PVDF terpolymer
active materials
File:
Download Arrojado_ErikaAnn_DevelopmentAndCharacterizationOfActiveTerpolymer.pdf
Thesis Supervisors:
Zoubeida Ounaies, Thesis Supervisor
Zoubeida Ounaies, Thesis Honors Advisor
Mary I Frecker, Faculty Reader

12. ASSESSING THE IMPACT OF GRAPHICAL USER INTERFACES ON USER DESIGN PERFORMANCE USING QUADCOPTERS IMPLEMENTING STRUCTURAL BATTERIES

open_access
Open Access
Author:
Nolff, Andrew James
Title:
ASSESSING THE IMPACT OF GRAPHICAL USER INTERFACES ON USER DESIGN PERFORMANCE USING QUADCOPTERS IMPLEMENTING STRUCTURAL BATTERIES
Area of Honors:
Engineering Science
Keywords:
structural batteries
quadcopters
optimization
graphical user interfaces
energy storage
dynamics
aerodynamics
File:
Download Nolff_Andrew_QuadDesignTool.pdf
Thesis Supervisors:
Mary I Frecker, Thesis Supervisor
Joseph Lawrence Rose, Thesis Honors Advisor

13. Evaluation of the Energy Absorbed by Additively Manufactured Contact-Aided Compliant Mechanisms Under Compression

open_access
Open Access
Author:
Mc Cartney, Carrie
Title:
Evaluation of the Energy Absorbed by Additively Manufactured Contact-Aided Compliant Mechanisms Under Compression
Area of Honors:
Mechanical Engineering
Keywords:
Compliant Mechanisms
Psuedo Rigid Body Model
Energy Absorption
Additive Manufacturing
C3M
Contact-aided Compliant Mechanisms
Compression
File:
Download McCartney_Thesis_FinalSubmission.pdf
Thesis Supervisors:
Mary I Frecker, Thesis Supervisor
Anne Elizabeth Martin, Thesis Honors Advisor

14. Optimal Design of Two-Phase Flow Channels for Additive Manufacturing Using Multi-Objective Genetic Algorithms

open_access
Open Access
Author:
Evich, Nicholas
Title:
Optimal Design of Two-Phase Flow Channels for Additive Manufacturing Using Multi-Objective Genetic Algorithms
Area of Honors:
Mechanical Engineering
Keywords:
Homogeneous Equilibrium Model
Additive Manufacturing
Genetic Algorithms
File:
Download Evich_Nicholas_Thesis.pdf
Thesis Supervisors:
Matthew J Rau, Thesis Supervisor
Jean-Michel Mongeau, Thesis Honors Advisor
Mary I Frecker, Thesis Supervisor

15. Optimal Design of Additively Manufactured Fin Topology for a Two-Phase Flow Channel Using Multi-Objective Genetic Algorithms

restricted_to_institution
Restricted (Penn State Only)
Author:
Luu, Anthony
Title:
Optimal Design of Additively Manufactured Fin Topology for a Two-Phase Flow Channel Using Multi-Objective Genetic Algorithms
Area of Honors:
Mechanical Engineering
Keywords:
fins
topology
optimization
heat transfer
genetic algorithm
two-phase flow
multi-objective optimization
additive manufacturing
mechanical engineering
File:
Login to Download
Thesis Supervisors:
Matthew J Rau, Thesis Supervisor
Anne Elizabeth Martin, Thesis Honors Advisor
Mary I Frecker, Thesis Supervisor